promo: what's next? taking industry leadership or watching from the sidelines?

what's next? taking industry leadership or watching from the sidelines?

take the lead with up to 60% off our instruments

r&s®areg800a 汽车雷达回波发生器 | rohde & schwarz-九游官网下载

r&s®areg800a 汽车雷达回波发生器
打开灯箱
r&s®areg800a 汽车雷达回波发生器
打开灯箱
r&s®areg800a 汽车雷达回波发生器
打开灯箱
r&s®areg800a 汽车雷达回波发生器
打开灯箱
r&s®areg800a 汽车雷达回波发生器
打开灯箱

主要特点

  • 生成多个具有不同距离、大小、径向速度和角方向的动态人造目标 
  • 与 r&s®qat100 高级天线阵列和典型的毫米波前端搭配使用,可用于所有汽车雷达频段的高级测试
  • 瞬时带宽高达 5 ghz,满足未来需求;生成动态目标,最短距离可低至空气间隙
  • 内置 hil 处理器和接口可用于同步多个 r&s®areg800a 仪器以创建大规模场景
  • 支持 sub-6 ghz 和 fr2 频段的通信感知一体化 (isac) 测试 

    使用先进的九游官网下载的解决方案加快进行汽车雷达测试

    r&s®areg800a 汽车雷达回波发生器是一款创新、多功能的汽车雷达传感器测试九游官网下载的解决方案。r&s®areg800a 采用灵活和可扩展的理念,并可与 r&s®qat100 高级天线阵列搭配使用,满足市面上大部分高级雷达回波生成应用的测试要求。r&s®areg800a:

    • 适合测试紧急制动系统中的高分辨率近程雷达传感器
    • 完善地与创新的 r&s®qat100 高级天线阵列前端搭配使用以生成各种场景
    • 专用于基于雷达的高级驾驶辅助系统 (adas)/自动驾驶 (ad) 和自动驾驶的场景生成与功能性安全测试
    • 功能多样。可用于从预开发、验证到批量生产的所有应用
    r&s®areg800a 不仅适用于典型的汽车安全应用,还可以用作多功能测试九游官网下载的解决方案的核心组件,为研发通信感知一体化 (isac) 提供支持。isac 是 6g 的关键技术,将各有异同的通信和环境感知融为一体。

    特性和优点

    探索先进的汽车雷达测试九游官网下载的解决方案

    让测试装置满足未来要求。r&s®areg800a 具有 4 ghz 瞬时带宽,支持较小的人造目标距离,并能够同时生成大量的动态人造目标,可为先进的测试装置提供支持:

    • 完善地与 r&s®qat100 高级天线阵列搭配使用以用于高级 adas 测试和场景生成
    • 支持典型的毫米波前端以用于基本台式仪器和验证测试,例如可以和 ats1500c 屏蔽箱结合使用
    • 瞬时带宽高达 4 ghz,满足未来需求,可用于近程雷达测试
    前端可用于各种测试用例
    打开灯箱

    前端可用于各种测试用例

    r&s®areg800a 提供各种射频前端,能够量身定制以满足不同的测试需求。

    实现一流的灵活性

    r&s®areg800a 配置支持量身定制,适合要求严苛的汽车雷达回波生成应用,包括从早期的雷达传感器研发到先进的整车 adas/ad 测试:

    • 使用 r&s®ats1500c 在早期研发、芯片组开发和雷达传感器验证阶段模拟包含动态人造目标距离的场景
    • 适用于 adas/ad 功能和算法开发的硬件在环 (hil) 测试
    • 使用滚筒式测力计的实车在环 (vil) 测试,可用于车辆认证和鉴定
    • 先进的 4d 雷达传感器生产测试,满足对测试设备的严格要求
    r&s®areg800a 和 r&s®ats1500c 组合非常适用于开发 4d 成像雷达
    打开灯箱

    r&s®areg800a 和 r&s®ats1500c 组合非常适用于开发 4d 成像雷达

    r&s®areg800a 和 r&s®ats1500c 天线测量暗箱组成九游官网下载的解决方案,能够在远场条件下准确验证和校准汽车雷达。

    在虚拟道路上进行逼真的测试

    r&s®qat100 高级天线阵列和 r&s®areg800a 汽车雷达回波发生器相结合,能够应对自动驾驶难题。现在,这款九游官网下载的解决方案率先能够可靠、可重复、逼真地测试基于雷达的 adas/ad 功能。

    逼真的测试
    打开灯箱

    逼真的测试

    专用于生成场景,以便测试基于雷达的 adas/ad 和自动驾驶九游官网下载的解决方案的功能性安全。

    将真实路测带到实验室

    专用于生成场景,以便测试基于雷达的 adas/ad 和自动驾驶的功能性安全。可以通过虚拟方式生成并测试复杂和危险的 adas/ad 驾驶场景:

    • 利用快速响应的开放实时接口,能够在标准工业模拟环境中控制 r&s®areg800a;
    • r&s®areg800a 非常适用于开环和闭环测试用例。
    减少公路测试的里程数
    打开灯箱

    减少公路测试的里程数

    r&s®areg800a 结合 r&s®qat100,能够在测试台上进行可靠且逼真的整车 vil 测试。这种组合能够以出色的测试用例可重现性执行欧洲新车评估计划 (euro ncap) 测试用例。

    优化 adas/ad 测试

    r&s®areg800a 支持先进的测试装置,能够最大程度地减少路测。这款仪器能够:

    • 优化研发和测试时间
    • 缩短全新 adas/ad 功能的上市时间
    • 减少开发和测试成本
    测试当今和未来的汽车雷达传感器与基于雷达的 adas
    打开灯箱

    测试当今和未来的汽车雷达传感器与基于雷达的 adas

    让未来成为现实 - isac

    通信和汽车雷达看似两个不同的技术领域,但二者共同构建了牢固的基石,推动 实现和采用通信感知一体化 (isac) 技术。 r&s®areg800a 是一款屡获殊荣、可靠且可重复的测试九游官网下载的解决方案,并具有以下特性:

    • 支持 sub-6 ghz 和 fr2 频段(配备 r&s®fe44s 时频率范围高达 24 ghz 至 44 ghz)
    • 信号完全透明,支持所有调制类型
    • 能够在从数米到 3 km 的距离范围内生成人造目标 
    • 能够使用多达 32 个独立的人造目标模拟人口稠密的真实城市场景 

    为 red 作好准备

    • 连接 r&s®nrp8s(n) 功率探头,根据适用标准测量传感器的等效全向辐射功率 (eirp)
    • 连接模拟或矢量信号发生器,验证雷达传感器对带内干扰信号的抗扰性
    • 连接信号与频谱分析仪,测量占用带宽和雷达信号质量
    打开灯箱

    r&s®areg800a 和 r&s®fsw8 信号与频谱分析仪相结合,非常适用于并行生成回波和分析雷达信号。

    操作简单,运行平稳

    带触摸屏控制的直观化图形用户界面 轻松直观地配置测试装置 优化以尽量减小尺寸 内置 scpi 宏记录器具有代码生成器,能够轻松集成到现有的测试软件

    直观的图形用户界面
    打开灯箱

    直观的图形用户界面

    简单的人机界面和带触摸屏控制的图形用户界面,便于轻松直观地进行配置

    规格
    前端和一般概念
    回波生成类型动态人造目标生成
    回波生成理念混合——目标距离小于 17 m,生成模拟回波;对于更远的目标距离,生成数字回波
    (可选:完全数字化,目标距离低至空气间隙,可用于 fmcw 雷达测试)
    远程前端r&s®areg8-24s/-24d/-81s/-81d典型的毫米波远程前端  
    r&s®qat100创新的 r&s®qat100 电子控制式天线阵列
    配备 r&s®fe44s支持 24 ghz 至 44 ghz fr2 频段的通信感知一体化 (isac) 测试 
    每个基本单元中远程前端的最大数量 配备 r&s®areg8-24s/-24d/-81s/-81d至多 4 个典型的毫米波远程前端 
    配备 r&s®qat100配备 r&s®qat100 时至多 8 个
    频率
    射频频段配备 r&s®areg8-24s/-24d24-24.25 ghz
    配备 r&s®fe44s24-44 ghz
    配备 r&s®areg8-81s/-81d76-81 ghz
    配备 r&s®qat10076-81 ghz
    瞬时带宽配备 r&s®areg8-b91 ghz
    配备 r&s®areg8-b9 和 r&s®areg8-k5272 ghz
    配备 r&s®areg8-b9、r&s®areg8-k527 和 r&s®areg8-k5284 ghz
    人造目标
    最小人造目标距离 配备 r&s®areg8-b9< 17 m 空气间隙
    配备 r&s®areg8-b9 和 r&s®areg-b63< 4 m 空气间隙
    配备 r&s®areg8-b9 和 r&s®areg8-k814空气间隙
    配备 r&s®areg8-b9、r&s®areg8-b63 和 r&s®areg8-k814空气间隙
    覆盖的人造目标距离范围配备 r&s®areg8-b9< 17 m 至 3000 m
    配备 r&s®areg8-b9 和 r&s®areg8-b63< 4 m 至 3000 m
    配备 r&s®areg8-b9 和 r&s®areg8-k814空气间隙至 3000 m
    配备 r&s®areg8-b9、r&s®areg8-b63 和 r&s®areg8-k814空气间隙至 3000 m
    每个 r&s®areg800a 基本单元中人造目标的最大数量配备 r&s®qat100人造目标距离小于 4 m 至 17 m:
    至多 4 个,具有不同的方位角、距离、雷达散射截面积 (rcs) 和多普勒频移,配备 areg8-b63
    至多 8 个,具有不同的方位角、距离、rcs 和多普勒频移,配备 areg8-k814


    人造目标距离大于 17 m:
    至多 8 个,具有不同的方位角、距离、rcs 和多普勒频移
    配备 r&s®areg8-24s/-24d/-81s/-81d人造目标距离小于 4 m 至 17 m:
    至多 4 个,具有不同的距离、rcs 和多普勒频移(每个毫米波前端 1 个),配备 areg8-b63
    至多 32 个,具有不同的距离、rcs 和多普勒频移(每个毫米波前端 8 个),配备 areg8-k814
     
    人造目标距离大于 17 m:
    至多 32 个,具有不同的距离、rcs 和多普勒频移(每个毫米波前端 8 个)
     
    配备 r&s®fe44s人造目标距离小于 4 m 至 17 m:
    至多 4 个,具有不同的距离、rcs 和多普勒频移(每个毫米波前端 1 个)
     
     
    人造目标距离大于 17 m:
    至多 32 个,具有不同的距离、rcs 和多普勒频移(每个毫米波前端 8 个)
    目标距离步长< 2.5 cm(标称值)
    目标距离精确度< 5 cm(测量值)
    与被测设备之间的空气间隙建议:应确保足够的空气间隙以匹配被测雷达的远场条件
    径向速度
    每个目标具有不同的径向速度 
    多普勒设置范围标配 ±500 km/h,可选择扩展
    速度步长0.001 km/h(测量值)
    电平
    所有人造目标的动态 rcs 范围配备 r&s®areg8-24s/-24d/-81s/-81d90 db
    配备 r&s®qat10080 db
    每个中频路径中多个目标的动态 rcs 范围配备 r&s®areg8-24s/-24d/-81s/-81d60 db
    配备 r&s®qat100-
    rcs 控制步长0.5 db
    幅度平坦度r&s®qat100 单机< ±5 db,4 ghz 带宽(测量值)
    最大前端接收功率配备 r&s®qat1000 dbm,77 ghz(标称值)
    推荐的前端接收功率配备 r&s®qat100-20 dbm,77 ghz(标称值)
    最小前端接收功率配备 r&s®qat100-60 dbm,77 ghz(标称值)
    最大前端发射功率配备 r&s®qat1000 dbm,77 ghz(标称值)
    中频输入/中频输出接口
    中频输出端口配备 r&s®areg8-k740基本单元上用于等效全向辐射功率 (eirp) 和雷达信号参数测量的中频输出
    中频输入端口配备 r&s®areg8-k741基本单元上用于叠加干扰的中频输入
    硬件在环接口
    专用 hil 接口配备 r&s®areg8-k109hil 协处理器
    hil 接口更新率配备 r&s®areg8-k109< 0.03 ms(测量值)
    开放标准协议支持配备 r&s®areg8-k109开放模拟接口 (osi)
    用户界面和远程控制
    带触摸控制的图形用户界面
    远程控制接口以太网
    配备 r&s®areg8-k986gpib
    远程控制命令集scpi
    通用参数
    尺寸5 he,宽 19" 
    重量取决于选件15–26 kg

    可用选项

    基带
    产品
    描述
    r&s®areg8-b9

    订单号码 1437.8011.02

    描述

    数字基带,具有 1 ghz 带宽、1 个中频路径和 1 个独立目标 

    r&s®areg8-b63

    订单号码 1437.8205.02

    描述

    analog stepped delay line for short object generation with 1 if path and 1 indivdual object 

    带宽升级
    产品
    描述
    r&s®areg8-k527

    订单号码 1437.9882.02

    描述

    1 个中频路径的基带从 1 ghz 带宽扩展到 2 ghz

    r&s®areg8-k528

    订单号码 1437.9799.02

    描述

    baseband extension from 2 ghz to 5 ghz bandwidth for 1 if path 

    基带增强
    产品
    描述
    r&s®areg8-k570

    订单号码 1437.9899.02

    描述

    为具有 1 ghz 带宽和 1 个单独目标的基带激活第二个中频路径

    r&s®areg8-k812

    订单号码 1437.9853.02

    描述

    适用于所有已安装中频路径的一个附加人造目标

    r&s®areg8-k813

    订单号码 1437.9901.02

    描述

    extended doppler frequency shift up to 10 mhz offset 

    r&s®areg8-k814

    订单号码 1437.9776.02

    描述
    中频端口和控制接口
    产品
    描述
    r&s®areg8-k986

    订单号码 1437.9818.02

    描述

    remote control gpib

    r&s®areg8-k740

    订单号码 1437.9830.02

    描述

    模拟中频输出接口

    r&s®areg8-k741

    订单号码 1437.9847.02

    描述

    模拟中频输入接口

    r&s®areg8-k109

    订单号码 1437.9860.02

    描述

    硬件在环控制接口

    r&s®areg8-k549

    订单号码 1437.9876.02

    描述

    synchronization interface for multiple areg800as

    r&s®areg8-k553

    订单号码 1437.9782.02

    描述
    通用
    产品
    描述
    r&s®areg8-24s

    订单号码 1437.8611.02

    描述

    single antenna frontend 24 ghz to 24.25 ghz

    r&s®areg8-24d

    订单号码 1437.8640.02

    描述

    dual antenna frontend 24 ghz to 24.25 ghz 

    r&s®areg8-81s

    订单号码 1437.8734.02

    描述

    single antenna frontend 76 ghz to 81 ghz

    r&s®areg8-81d

    订单号码 1437.8763.02

    描述

    dual antenna frontend 76 ghz to 81 ghz 

    描述

    advanced antenna array

    描述
    通用附件
    产品
    描述
    r&s®zn-ztw

    订单号码 1328.8534.19

    描述

    力矩扳手,0.9 nm

    r&s®wca12-135

    订单号码 1700.3977.02

    描述

    waveguide coax adapter wr12 to 1.35mm (f)

    waveguide coax adapter wr12 to 1.35 mm female with s-parameter characterisation, wg stabilzation bracket for usb and lan nrp power sensors 60 - 90 ghz 

    related videos

    explainer video: implementing realistic tests on virtual roads

    the r&s®qat100 antenna array and r&s®areg800a radar echo generator together make the most powerful and scalable automotive radar object simulation system available. watch this video to see how its advanced features can cover all scenarios from single static objects to complex moving traffic scenarios.

    10月 10, 2023

    application video: accelerating adas-ad with hardware-in-the-loop testing

    3月 02, 2022

    高精度带内雷达测试九游官网下载的解决方案

    观看在 ces 2022 展会现场介绍的罗德与施瓦茨高精度带内雷达测试九游官网下载的解决方案。

    3月 01, 2022

    高精度带内雷达测试九游官网下载的解决方案

    观看在 ces 2022 展会现场介绍的罗德与施瓦茨高精度带内雷达测试九游官网下载的解决方案。

    3月 01, 2022

    ces: automotive radar object simulation for validation

    check out r&s automotive radar object simulation solutions for validations, live from the show floor at ces 2022.

    1月 31, 2022

    ces: automotive radar object simulation for validation

    check out r&s automotive radar object simulation solutions for validations, live from the show floor at ces 2022.

    1月 31, 2022

    应用视频:使用 areg800a 和 qat100 模拟汽车电子雷达目标

    观看视频,了解我们的雷达测试系统在不同应用中的输出性能。本视频展示了 rts 的独立操作、远程控制和硬件在环 (hil) 基础设置。

    12月 23, 2021

    应用视频:使用 areg800a 和 qat100 模拟汽车电子雷达目标

    观看视频,了解我们的雷达测试系统在不同应用中的输出性能。本视频展示了 rts 的独立操作、远程控制和硬件在环 (hil) 基础设置。

    12月 23, 2021

    请求信息

    如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

    推广许可

    你的申请已提交,我们稍后会联系您。
    an error is occurred, please try it again later.
    大体信息,法律信息

    manufacturer's recommended retail price (msrp). the price shown does not include vat. prices and offers are only intended for entrepreneurs and not for private end consumers.

    you may use the electronic signature via docusign to submit your information to enroll with the rohde & schwarz customer delegated administration program. docusign processes the information provided according to their . the minimum system requirements for using the docusign system may change over time. the current system requirements are found

    terms & conditions of the prize draw 10 years rohde & schwarz oscilloscopes

    1. the prize draw “10 years rohde & schwarz oscilloscopes” (herein referred to as “draw”) is organized by rohde & schwarz gmbh & co. kg, mühldorfstraße 15, 81671 munich, germany, tel. 49 89 41 29 0 (herein referred to as “r&s).

    2. all participators can register to the draw during january 01, 2020 to december 31, 2020 with their name, company name and business e-mail.

    3. participation is free of charge and not dependent on the purchase of goods or services.

    4. the draw is only open to legal entities and only the legal entities are able to win the prizes. an individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

    5. the prizes to win are 1 of 10 r&s®rtb2000 within the time frame january 1, 2020 to december 31, 2020:

    prize: 1x r&s®rtb2000 digital oscilloscope

    6. the draw takes place at rohde & schwarz headquarters, muehldorstrasse 15, 81671 munich. the winner of the prizes will be informed by e-mail within 5 (5) working days.

    7. the authorized representative of the legal entity shall inform rohde & schwarz about the acceptance of the price. in case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. if no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

    8. r&s’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

    9. no cash equivalent or exchange of prizes is allowed. prizes are non-transferable. all taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

    10. personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

    11. any participant who does not comply with these terms & conditions may be disqualified by r&s from this competition. in such cases, prizes can also be withdrawn retrospectively. in case a prize is withdrawn retrospectively due to the non-compliance with these terms & conditions, it shall be returned by the respective participant at his cost to r&s’ address mentioned under nr.1 and a new winner will be drawn.

    12. the participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

    13. the draw and any contractual relationship arising therefrom between r&s and the respective participant shall be governed by and construed in accordance with the laws of germany, without any recourse to the conflict of laws. the courts of munich, germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this competition.

    * “fast delivery” inside 7 working days applies to the rohde & schwarz in-house procedures from order processing through to available ex-factory to ship.

    网站地图