| frequency range |
r&s®znl3 |
5 khz to 3 ghz |
| |
r&s®znl4 |
5 khz to 4.5 ghz |
| |
r&s®znl6 |
5 khz to 6 ghz |
| dynamic range |
|
>120 db (spec.); typ. >130 db |
| output power |
|
0 dbm (spec.); typ. 3 dbm |
| trace noise |
|
<0.0035 db (spec.); typ. < 0.0005 db |
| measurement speed |
| sweep time |
401 points, 2-port tosm, 200 mhz span, 100 khz ifbw |
16.7 ms |
| data transfer |
over iec/ieee/gpib, 201 points |
typ. 3 ms |
| |
hislip over 1 gbit/s lan |
typ. 2.5 ms |
| measurement parameters |
|
s-parameters (sxy), wave quantities, wave ratios, impedance parameters (zxy), admittance parameters (y), stability factors |
| display formats |
|
db, magnitude, phase, smith chart, polar diagram, swr, unwrapped phase, linear magnitude, inverse smith chart, real, imaginary, delay |
| calibration methods |
|
reflection normalization (open or short), reflection (osm (osl)), enhanced reflection normalization (om or sm), transmission normalization (response calibration), transmission normalization in both directions (response calibration), one-path twoport, tosm (solt) |
| number of points |
vector network analyzer mode |
1 to 100 001 |
| |
spectrum analyzer mode |
101 to 100 001 |
| if bandwidth (ifbw) |
|
1 hz to 500 khz, in steps of 1/1.5/2/3/5/7 |
|
spectrum analysis (r&s®znl3 with r&s®znl3-b1, r&s®znl4 with r&s®znl4-b1 or r&s®znl6 with r&s®znl6-b1 option)
|
| frequency range |
r&s®znl3 |
5 khz to 3 ghz (1 hz resolution) |
| |
r&s®znl4 |
5 khz to 4.5 ghz (1 hz resolution) |
| |
r&s®znl6 |
5 khz to 6 ghz (1 hz resolution) |
| displayed average noise level (danl) |
rf attenuation 0 db |
<-140 dbm (spec.); typ. <-150 dbm |
| phase noise |
1 ghz, 10 khz offset |
<-103 dbc (1 hz); <-108 dbc (1 hz) |
| max. signal analysis bandwidth |
with option r&s®fpl1-b40 |
40 mhz |
| intermodulation |
| third-order intercept point (toi) |
300 mhz ≤ fin ≤ 3 ghz |
>16 dbm (spec.); typ. >20 dbm |
| second harmonic intercept (shi) |
900 mhz ≤ fin ≤ 1.5 ghz |
70 dbm (nom.) |
|
general features
|
| limit lines |
vector network analyzer mode |
single, segmented, upper limit, lower limit |
| number of channels |
within one vector network analyzer setup |
no limitation |
| number of channel setups |
|
max. 14 |
| number of traces (simultaneous display) |
vector network analyzer mode |
no limitation |
| |
spectrum analyzer mode
(r&s®znl3-b1/r&s®znl4-b1/r&s®znl6-b1 option) |
6 |
| number of markers |
vector network analyzer mode |
10 1 reference marker (per trace)/td> |
| |
spectrum analyzer mode
(r&s®znl3-b1/r&s®znl4-b1/r&s®znl6-b1 option) |
16 |
|
general data
|
| operating system |
|
windows 10 |
| display |
|
10.1" (26.4 cm) wxga color lcd, multitouch screen |
| dimensions (w × h × d) |
|
408 mm × 186 mm × 235 mm (16.06 in × 7.32 in × 9.25 in) |
| weight |
depending on configuration |
6 kg to 8 kg (13.23 lb to 17.64 lb) |