r&s®smr microwave signal generator | features & benefits -九游官网下载
high-performance, cost-effective and reliable up to 40 ghz
- wide output frequency range from 10 mhz to 40 ghz with 0.1 hz resolution
- high-precision output level
- fast setting time for frequency and level
- analog ramp sweep option
- analog ramp sweep
- if upconversion
- low cost of ownership with a three-year calibration cycle
- compact size (r&s®smr20/27/30/40 only 2 hu)
- am/scan, fm, ask/fsk and pulse modulation
the r&s®smr family now consists of four models:
- r&s®smr20 (10 mhz to 20 ghz)
- r&s®smr27 (10 mhz to 27 ghz)
- r&s®smr30 (10 mhz to 30 ghz)
- r&s®smr40 (10 mhz to 40 ghz)
all models include a very fast frequency switching time of < 10 ms 2 ms /ghz and a resolution of 0.1 hz.
- typical output power versus frequency including a mechanical step attenuator for r&s®smr20 and r&s®smr40.
microwave signal generators are frequently used for calibrating test receivers. this task calls for a highly accurate and stable output level settable with high resolution. this is ensured by a high-precision, frequency-response-compensated level control for levels higher than –20 dbm. the setting range can be extended to –130 db with the optional rf attenuator r&s®smr-b15 or r&s®smr-b17.
the synthesizer concept allows very fast setting times. this is an important feature which makes the r&s®smr ideal for use in production where speed is of prime importance.
- comparison between a conventional ramp sweep using a yig oscillator and the r&s®smr fully synthesized ramp sweep.
the analog ramp sweep mode corresponds to the analog sweep of classic sweep generators except that the sweep is fully synchronized over the complete range. in this way, the excellent frequency accuracy of digital step sweeps is achieved on the whole, and this at much higher sweep rates of min. 600 mhz/ms at frequencies >2 ghz. in conjunction with scalar network analyzers or suitable spectrum analyzers, realtime adjustment of microwave filters can be performed, for example. to mark important frequency ranges such as filter bandwidths or the position of attenuation poles, the r&s®smr has 10 user-selectable frequency markers which can be output as pulse markers at the marker output (ttl level) or alternatively modulated on the rf level as level markers (level reduction of 1 db). the use of the r&s®smr in conjunction with a scalar network or spectrum analyzer is illustrated by the figure at the bottom of page 4.
- scalar network analysis with the r&s®smr
with the if upconverter, the r&s®smr can generate any vector-modulated signal in the microwave frequency range. the modulated if signal is provided by a signal generator, e.g. the r&s®smu/smj/smate or r&s®smv r&s®amiq. three different upconverters for the r&s®smr20 up to r&s®smr40 are available
the three-year calibration interval cuts costs and increases availability.
space is often a precious commodity in production. the instruments of the r&s®smr family are the smallest in their classes.
in addition to cw, the r&s®smr covers classic analog modulation without any restrictions. with dc-coupled fm, for example, the r&s®smr can be set up as an accurate vco. the combination of the different modulation types allows the generation of more complex test scenarios. in addition, the built-in pulse modulator offers a pulse delay to test complete radar systems.