r&s®fsp spectrum analyzer | features & benefits -九游官网下载
general purpose spectrum analyzer - the standard in the medium class
此产品已停产
请注意以下后代产品：
the spectrum analyzers r&s fsp are outstanding for their innovative measurements and a host of standard functions.
- full choice of detectors
- max, min-, auto-peak, sample, rms, average, quasi-peak
- cp/acp/fast acp measurement functions with a host of predefined standards
- multi carrier acp measurement with independent inter carrier spacing support
- acp/mcap with up to 12 adjacent channels and max hold power function
- automatic test routines for measuring toi, obw, phase noise, and acp®, am modulation depth
- harmonic distortion measurement
- ccdf & apd function (y-unit % possible)
- editable limit lines including pass/fail indication
-
- ccdf of a wcdma signal
-
- measurement of adjacent-channel power in time domain: fast acp
-
- measurement of toi
-
- measurement of burst power (top). determination of obw (bottom)
-
- measurement of modulation depth of am signal
- rbw-characteristics:
- digital filters from 10 hz to 100 khz (1,3,10 steps)
- analog filters from 300 khz to 10 mhz (1,3,10 steps)
- 39 channel filters 100 hz to 5 mhz
- rrc filters (is-136, tetra, wcdma)
- emi bandwidth standard
- fft filters 1 hz to 30 khz
-
- comparison of sweep times for 200 khz span using digital filters or fft
-
- comparison of 1 mhz channel filter and normal 1 mhz resolution filter
- 10 db step attenuator (5 db with fsp-b25)
- electronic attenuator and preamplifier option
- if power trigger with sensitivity down to – 50 dbm mixer level
- gated trigger function
- full choice of marker functionality
- phase noise, noise, n db down / n db up , peak list, frequency counter (0.1 hz in 30ms)
- internal tracking generator with power sweep support
- external generator control (reverse sweep)
- extension of frequency range with external mixers with bias tuning support whilst trace display is active
- hp 859x/8566/8591e/71100c/71200c/71209c compatible gpib command set
- fsex/fsiq compatible gpib command set
- list mode for extremely fast gpib operation
- ethernet interface (100 base t)
- 21 cm color svga tft display
- split screen mode
- operating system: embedded windows xp
- easy documentation of measurements
- remote desktop functionality
- compatibility (printer drivers, network, etc.)
- interfaces: gpib, rs-232-c, lan (option), usb
- vxi-11 remote support
- wide range of available application firmware including code domain power measurements for 3 gpp communication standards
- bluetooth
- gsm/edge
- 3 gpp wcdma, hsdpa, td-scdma
- cdma2000, 1xev-dv, 1xev-do
- wlan 802.11a (restricted ofdm spectrum)
- noise figure and gain measurements
- fm/pm/am measurement demodulator
- phase noise measurement
- power sensor measurement supporting the power sensors r&s nrp-z11, z21, z22, z23, z24, z51, z55, z81, z91, the external power meters r&s nrvd, hp epm, hp 437b, hp438a and power splitter