r&s®emc32-九游官网下载

the option r&s^®emc32-k33 extends the emission measurement capabilities of r&s^®emc32 for running emission measurements in the reverberation chamber operated in the mode tuned mode according to en 61000-4-21:2003.

• radiated emission measurement according to en 61000-4-21:2003 annex e (mode tuned operating mode)
• preview measurement for different tuner steps in defined frequency subranges
• calculation and display of the dut’s radiated power and estimated free space field strength
• optional data reduction to mark the critical frequencies compared to the limit line
• fully integration of the test results into the r&s^®emc32 test report
• supports usage of chamber calibration data and dut check data from the r&s^®emc32-k3 susceptibility section for r&s^®emc32

the emission measurement in the reverberation chamber is executed as an r&s^®emc32-k10 emi auto test sequence where the following sequence steps are executed:

• preview measurement with maximum hold and averaging of the measured radiated power over one tuner rotation (using the predefined tuner steps of the emi scan / sweep template for this subrange) and for each hw setup frequency subrange.
• the averaged and max hold values will be shown is a separate graphics. after one subrange over one tuner rotation is completed the evaluated results will be shown in a radiated power and estimated e-field strength graphics.
• data reduction: optional a data reduction of the estimated e-field data may be executed in order to mark the critical frequencies in the graphics and to generate a final result table containing these frequencies. in this case also a limit line will be drawn in the e-field strength graphics.