r&s®ts-九游官网下载

automotive dut supply and load switching up to 50 a

key facts

  • four high-power channels for currents up to 50 a
  • four medium-power channels for currents up to 2 a
  • switching voltage up to 30 v

brief description

the r&s®ts-psm5 is the innovative implementation of a rugged, modular switching device to make high-current switching an intrinsic part of your test system.

features collapsed

  • ruggedized mechanical construction
  • industrially approved virginia panel corp. power connector available for sophisticated test receiver deployment
  • suitable virginia panel corp. gemini test receivers available for the r&s®tsvp chassis

specifications

interface
control bus can 2.0b (1 mbit/s)
rear i/o connector compactpci, 110 pins

key facts

  • four high-power channels for currents up to 50 a
  • four medium-power channels for currents up to 2 a
  • switching voltage up to 30 v
  • integrated current measurement via current sensors and analog bus coupling
  • rear i/o access to the power signals for unique flexibility during system integration and seamless adaptation to power supplies and loads within a system paradigm based on r&s®powertsvp
  • unique comprehensive selftest and measurement of relay contact resistance
  • support by the r&s®ts-lsrl signal routing library provides intelligent and secure switch path computing

brief description

the r&s®ts-psm5 is the innovative implementation of a rugged, modular switching device to make high-current switching an intrinsic part of your test system.

the r&s®ts-psm5 high-power switching module was developed to add high-current switching up to 50 amps to the standard functionality of the r&s®tsvp test system versatile platform.

powerful and flexible switching capabilities are combined with ruggedized signal connection and high availability ecured by switching cycle monitoring. the r&s®ts-psm5 can be used in both the r&s®compacttsvp (r&s®ts-pca3) and the r&s®powertsvp (r&s®ts-pwa3).

a switch cycle counter for reliable operation and monitoring strain of the relays is implemented by an fram accessible by the on-board microprocessor. readings can be retrieved from the module via the ivi switch driver.

features & benefits

  • key features
    • ruggedized mechanical construction
    • industrially approved virginia panel corp. power connector available for sophisticated test receiver deployment
    • suitable virginia panel corp. gemini test receivers available for the r&s®tsvp chassis
    • high-quality cage clamp terminal blocks for reliable power cabling and convenient dismantling
    • switch cycle counter
  • typical applications
    • distribution of a power supply to multiple duts
    • flexible distribution of power supplies to duts including sense lines via medium-power relays
    • connection of test loads, original loads or simulated and electronic actuators in automotive test scenarios
    • multiplexing of power supplies and electronic loads
    • switching of dut supplies and loads with optional current measurement via current/voltage converters
    • routing of measurement signals to adjacent modules via analog measurement bus
    • automotive and general purpose switch simulation

specifications

 
application in the r&s®tsvp platform r&s®compacttsvp or r&s®powertsvp two slots on front
interface
  control bus   can 2.0b (1 mbit/s)
  dut connector (front) r&s®ts-psm5b high-power switching module none
  r&s®ts-psm5 high-power switching module with vpc connector bracket tripaddle signal/mini power module, receiver, 16/16 positions (virginia panel corporation)
contacts:
  • mini power, receiver, 12 to 14 awg, 50 µ gold
  • signal, receiver, tripaddle, 7 amp, 20 to 24 awg, 30 µ gold
  rear i/o connector compactpci 110 pins
  power 2 x 12 pins
channel switching characteristics
50 a high-power channels 1)   4 channels
relay type   zettler az983
switching voltage dc 24 v (max.)
switching current dc 50 a (max.)
switching power dc 1120 w (max.)
operate/release time   < 14 ms (typ.)
switching duty cycle at maximum operating frequency of 1 hz 1 : 10 (on : off)
short path high-power channels 1)   2 paths
relay type   zettler az987
switching voltage dc 16 v (max.)
switching current dc 30 a (max.)
switching power dc 480 w (max.)
operate/release time   < 4 ms (typ.)
2 a medium power channels   4 channels
relay type   axicom im03
switching voltage dc 30 v (max.)
  ac (peak) 46 v (max.)
switching current   2 a (max.)
switching power dc 60 w (max.)
  ac 62.5 va (max.)
operate/release time   < 6 ms (typ.)
analog measurement bus access and coupling relays
switching voltage dc 30 v (max.)
  ac (peak) 46 v (max.)
switching current   1 a (max.)
switching power dc 10 w (max.)
  ac 10 va (max.)
operate/release time   < 0.5 ms (typ.)
conditions
temperature range   23 °c ±5 °c
additional error specified by the temperature coefficient in the range   5 °c to 18 °c and
28 °c to 40 °c
warm-up   30 minutes
shunt resistor (2 a medium power channels)    
  nominal value   22 mω (nom.)
  accuracy correction values included, measured by r&s®ts-psam ±(1 % 4 ma)
temperature coefficient   ±75 ppm/k
i-to-v converter (50 a high-power channels)    
  type   lem cas 15
  theoretical sensitivity   41.67 mv/a (nom.)
  accuracy correction values included, measured by r&s®ts-psam ±(1 % 60 ma)
temperature coefficient   ±40 ppm/k
general data
power consumption reset state 5 v/0.3 a
  all chx relays activated, one channel connected to analog bus 5 v/1.5 a
environmental conditions    
  temperature operating temperature range 5 °c to 40 °c
  storage temperature range –10 °c to 60 °c
  damp heat   40 °c, 80 % rel. humidity, steady state,
in line with en 60068-2-30
mechanical resistance    
  vibration sinusoidal 5 hz to 55 hz, 0.15 mm amplitude const.,
55 hz to 150 hz, 0.5 g const.,
in line with en 60068-2-6
  random 10 hz to 300 hz, acceleration 1.2 g (rms),
in line with en 60068-2-64
  shock   40 g shock spectrum, in line with mil-std-810e,
method 516.4, procedure i
product conformity    
  electromagnetic compatibility eu: in line with emc directive 2004/108/ec applied harmonized standards:
en 61326-1 (industrial environment),
en 61326-2-1,
en 55011 (class a),
en 61000-3-2,
en 61000-3-3
  electrical safety eu: in line with
low voltage directive 2006/95/ec
applied harmonized standard,
in line with en 61010-1
dimensions (w x h x d) r&s®ts-psm5 40 mm × 174 mm × 316 mm
(1.58 in × 6.85 in × 12.44 in)
  r&s®ts-prio5 40 mm × 130 mm × 180 mm
(1.58 in × 5.12 in × 7.09 in)
weight r&s®ts-psm5b 945 g (2.08 lb)
  r&s®ts-psm5 1213 g (2.67 lb)
  r&s®ts-prio5 292 g (0.64 lb)
calibration interval recommended for highest accuracy 24 months

1) if the contact-applied voltage and contact-applied current are small, contact resistance may become a larger value due to a small amount of film on a contact surface.

谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取演示仪器

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和九游官网下载的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

获取报价

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。
请输入您的电话号码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和九游官网下载的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

请求信息

请输入您的询问。
请输入您的名字。
请输入您的姓名。
请输入有效的电子邮件地址。
请输入您的公司名称。
请输入城市名称。
请输入您的邮政编码。

请输入您的国家/地区。
推广许可

我同意通过以下方式接收罗德与施瓦茨提供的信息:


这意味着什么?

我同意,在网站imprint中提到的rohde & schwarz gmbh & co. kg和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和九游官网下载的解决方案相关信息

您的权利

您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

请输入图示字符
show captcha
输入错误。
do not enter data in this field
网站地图