11 结果
rscommander frederic schütze 1ma074 适用于罗德与施瓦茨仪器的多功能软件工具 rscommander 是一款多功能软件工具，适用于各式各样的罗德与施瓦茨频谱分析仪、网络分析仪、信号发生器以及示波器。它能够自动发现仪器、创建屏幕截图、读取迹线、传输文件以及创建简单脚本。 abfs, afq, afq100a, afq100b, amu, amu200a, cbt, esci, espi, esu, esib, espc, etl, fmu, fsc, fse, fsiq, fsp, fsu, fsq, fsl, fsmr, fsup, zva, zvb, zvl, zvt, zvx, cmu, cmu200, smu, smu200a, sma, sma100a, smb, smb100a, sme, smf, smf100a, smiq, sml, smt,
how to use rohde & schwarz instruments in matlab miloslav macko 1ma171 this application note outlines two different approaches for remote-controlling rohde & schwarz instruments out of mathworks matlab: the first one uses visa connection and direct scpi commands. the second approach takes advantage of rohde & schwarz vxi plug&play instrument drivers and matlab instrument control toolbox. matlab, rohde
lte-a 基站发射机测试 bernhard schulz 1ma154 3gpp ts36.141 规定了针对 eutra 基站 (enodeb) 的一致性测试。第 14 版增加了多项测试，特别是针对增强型授权辅助接入 (elaa) 的测试。 本应用指南介绍了如何使用罗德与施瓦茨的信号与频谱分析仪轻松快速地执行所有必要的发射机 (tx) 测试（ts36.141 第 6 章）。有些测试还需要使用罗德与施瓦茨的信号发生器。 通过示例说明具体的手动操作，使用免费软件程序支持并演示远程操作。 lte 基站接收机 (rx) 测试（ts36.141 第 7 章）如应用指南 1ma195 中所述。 lte 基站性能 (px) 测试（ts36.141 第 8 章）如应用指南 1ma162 中所述。 lte-a, lte, eutra, 基站, ts36.141, 第 10 版, 3gpp, enodeb,
npr 噪声功率比信号生成与测量 ottmar gerlach 1ma29 噪声功率比 (npr) 是 winiqsim™ 的一种附加工具，可用于生成噪声功率比激励信号，并使用罗德与施瓦茨仪器通过 lan 或 gpib 总线测量被测设备 (dut) 的最终噪声功率比。 npr, 噪声功率比, 噪声带宽, 陷波, tcp/ip, winiqsim, amiq, smiq, smr, smj100a, smv, smu200a, sfu, fsex, fsiq, fsp, fsu, fsg, fsw, smg, smw, 微波 npr – 噪声功率比信号生成与测量
interchangeable port connector system, test port adapter system 1ma100 a test port adapter system is implemented for all rohde & schwarz equipment, which operates above 26 ghz in order to protect the rf front-end from mechanical damage. the test port adapter system consists of an rf front-end interface called the test port adapter body, and the test port adapter head which is attached to the body.
在脉冲雷达功率放大器模块上测试 s 参数 1ma126 该应用指南描述了使用 r&s ® zva 矢量网络分析仪、在脉冲条件下测试 s 参数，以及将带有脉冲模块化选件的 zvax24 扩展单元或者带有脉冲调制器的 r&s ® smf 信号发生器作为信号源。 此外，该应用指南中还加入了针对需要高驱动功率的应用的恒功率电平校准，以便对被测设备 (dut) 执行测试与测量。 ldmos s 频段雷达功率晶体管作为 dut。 r&s®zva 的脉冲轮廓模式用于分析与时间有关的 dut 行为。 雷达, 脉冲, 放大器, s 参数, 恒功率电平校准, zva, zvax24, smf, smf100a, nrp-z, nrp-z211, bba, bba150, 网络分析仪, 矢量网络分析仪, 发生器, 信号发生器, 功率探头, 宽带放大器 在脉冲雷达功率放大器模块上测试 s 参数
development hints and best practices for using instrument drivers 1ma153 the aim of this application note is to provide information regarding rohde & schwarz instrument drivers. this paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (t&m) applications by utilizing rohde & schwarz instrument drivers. furthermore
rohde & schwarz drivers under vee - installation and troubleshooting 1ma035 the use of rohde & schwarz device drivers under vee software is not complicated. however, a number of factors are involved, the errors that occur are often difficult to diagnose. this application provides easy and detailed support for installation and troubleshooting using national instruments or agilent gpib boards. instrument
1ma86
gde test sequencer 1ma83 gde (= generic demonstration engine) is a easy-to-use, free-of-charge remote control command sequencer tool. the big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in gde at runtime. this makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup
discontinued: wcdma signal generator solutions by rohde & schwarz 1gp39 the smiqb vector signal generator and the amiq i/q modulation generator with the winiqsim™ software are outstanding signal sources for 3 rd generation communication systems. this paper describes how to apply r&s signal generators for 3gpp wcdma measurements, and introduces 3gpp wcdma and related measurement applications. amiq,smiq